Davenport Lift Control
Find Elevator & Escalator Genuine Spare Parts
*
*
or Search by dimensions
Home> Search for "door operator"

Your search results

Filter
(460) Products
Sematic, retiring cam for operators with manual swing landing door
Sematic, retiring cam for operators with manual swing landing door (3382001)
Dimensions: 470 x 114 x 30 mm
Limit Cam for door operator 9550T
Limit Cam for door operator 9550T (6020424)
Dimensions: 150 x 110 x 20 mm
Stator 500U/min. 3*105 Volt for door operator 9550T
Stator 500U/min. 3*105 Volt for door operator 9550T (6020833)
Dimensions: 152 x 132 mm
Door operator 9550CC, cover
Door operator 9550CC, cover (6020862)
Dimensions: 90 x 90 x 34 mm
Door motor drive wheel
Door motor drive wheel (6090227)
Dimensions: 26 x 52 x 14 mm
Door drive shaft left with coupler and end bearing, TB=800
Door drive shaft left with coupler and end bearing, TB=800 (6090254)
Dimensions: 1020 mm
Sematic, DC-motor 200V / 1A
Sematic, DC-motor 200V / 1A (6090289)
Dimensions: 150 x 210 x 120 mm
Attachment for screw drive right
Attachment for screw drive right (6090968)
Dimensions: 174 x 95 x 688 mm
Attachment for screw drive left
Attachment for screw drive left (6090969)
Dimensions: 174 x 95 x 688 mm
Gear wheel for VVF-door drive
Gear wheel for VVF-door drive (6090970)
Dimensions: 175 x 51 x 20 mm
Car door, traction wheel for door motor
Car door, traction wheel for door motor (6190125)
Dimensions: 10 x 14 x 134 x 120 x 13 mm
Connecting rod-skate to belt, CO=900, 3-panels/lieferbar.
Connecting rod-skate to belt, CO=900, 3-panels/lieferbar. (603510862)
Dimensions: 78 x 121 x 41.8 mm
Right chute
Right chute (6025260)
Dimensions: 20 x 259 x 13 mm
Left chute
Left chute (6025270)
Dimensions: 20 x 259 x 13 mm
Felt for overforce uncoupling device
Felt for overforce uncoupling device (6082016)
Dimensions: 30 x 30 x 11.3 mm
Rubber motor mounting
Rubber motor mounting (903510110)
Dimensions: 64 x 64 x 2 mm
2-transmission door operator, washer for spring
2-transmission door operator, washer for spring (9585040)
Dimensions: 20 x 6 x 8.5 mm
Limit Cam
Limit Cam (608210580)
Dimensions: 48.4 x 25.7 x 30.3 mm
Door A/2PO, rubber stop
Door A/2PO, rubber stop (913310015)
Dimensions: 26 x 41 x 30.5 mm
Bolt for reversing lever
Bolt for reversing lever (6082018)
Dimensions: 12 x 35 mm
Connecting latch
Connecting latch (6090133)
Dimensions: 28 x 100 x 5 mm
Chain tensioner for S/2PO-S/2PT
Chain tensioner for S/2PO-S/2PT (603310595)
Dimensions: 75 x 45 x 17.6 mm
Small toothed belt on door suspension
Small toothed belt on door suspension (913010160)
Dimensions: 18.8 x 76.7 x 4.36 mm
Fixing clamp for felt
Fixing clamp for felt (608210610)
Dimensions: 18 x 50.5 x 32.3 mm
Linear door operator, belt connector
Linear door operator, belt connector (6085410)
Dimensions: 10 x 50.8 x 20.6 mm
Clamp for toothed belt AT.. Door Operator
Clamp for toothed belt AT.. Door Operator (609010049)
Dimensions: 28 x 77 x 26.8 mm
Rubber ring for self closing weight
Rubber ring for self closing weight (9110015)
Dimensions: 26 x 30 x 22 mm
Drive arm spring
Drive arm spring (603510290)
Dimensions: 75.4 x 18.9 x 3 mm
Rubber buffer for carriage stop
Rubber buffer for carriage stop (9182010)
Dimensions: 22 x 14 x 12.5 mm
Drive chain clamp 15 teeth
Drive chain clamp 15 teeth (6089016)
Dimensions: 25 x 24 x 4 mm
Drive chain clamp 12 teeth
Drive chain clamp 12 teeth (6089117)
Dimensions: 28 x 33 x 5 mm
Roller for start support
Roller for start support (603010010)
Dimensions: 22.7 x 15.2 x 6.3 mm
2-transmission door operator, spring
2-transmission door operator, spring (9585020)
Dimensions: 80 x 11 x 1.2 mm
Cover for door lock FCOA9538A
Cover for door lock FCOA9538A (6020732)
Dimensions: 153 x 46 x 6 mm
Belt guide
Belt guide (603510080)
Dimensions: 29 x 16.5 x 32 mm
Door closing spring fixing
Door closing spring fixing (603510120)
Dimensions: 21.3 x 17.5 x 10.8 mm
Washer sliding door QKS8
Washer sliding door QKS8 (601011760)
Dimensions: 16 x 0.5 x 10.2 mm
Stop D20/M6*52
Stop D20/M6*52 (6020857)
Dimensions: 21 x 30 x 6 x 20 mm
Linear door operator, belt
Linear door operator, belt (9185020)
Dimensions: 18.8 x 584 x 3.7 mm
ASTRAGAL UNIVERSAL RUBBER 25M
ASTRAGAL UNIVERSAL RUBBER 25M (91873570)
Dimensions:No dimensions available.
Reinforcement for square tube
Reinforcement for square tube (6082013)
Dimensions: 30 x 74 x 11 mm
ASTRAGAL FEMALE 2 METRE
ASTRAGAL FEMALE 2 METRE (6644913)
Dimensions:No dimensions available.
Wiper for door suspension
Wiper for door suspension (603010495)
Dimensions: 30.7 x 40 x 16.3 mm
Rubber motor mounting
Rubber motor mounting (903510040)
Dimensions: 64 x 64 x 2 mm
Cam for door operator 9550Y
Cam for door operator 9550Y (6020020)
Dimensions: 55 x 46 x 10 mm
Clutch, lining
Clutch, lining (913010075)
Dimensions: 80 x 2.6 x 36 mm
Tooth belt, specify type of door and lenght, price per m
Tooth belt, specify type of door and lenght, price per m (9130020)
Dimensions: 19.3 x 0 x 4.5 mm
Door opener 9550CC, clip with bolt and spring
Door opener 9550CC, clip with bolt and spring (6020448)
Dimensions: 49 x 63 x 39 mm
Door drive shaft central with coupler and end bearing, TB=1400
Door drive shaft central with coupler and end bearing, TB=1400 (6090222)
Dimensions: 80 x 920 mm
Cam for toothed belt
Cam for toothed belt (601012916)
Dimensions: 15.9 x 19.8 x 27 mm
Door belt clamp
Door belt clamp (6020216)
Dimensions:No dimensions available.
Driving pulley D25
Driving pulley D25 (608212171)
Dimensions: 25 x 40 x 14 mm
Selcom, rope bowden for door brake
Selcom, rope bowden for door brake (8590000)
Dimensions: 5 x 570 x 2.7 mm
Axe for door operator (first wheel)
Axe for door operator (first wheel) (6082301)
Dimensions: 22 x 10 x 63 mm
Cover for door motor FO384JC1
Cover for door motor FO384JC1 (6020421)
Dimensions: 230 x 180 x 140 mm
Belt 8PJ1150
Belt 8PJ1150 (913010115)
Dimensions: 19 x 1143 x 3.8 mm
Chain
Chain (6085610)
Dimensions: 13.3 x 890 x 8.4 mm
Belt POLY-V L=965
Belt POLY-V L=965 (9182021)
Dimensions: 14.3 x 965 x 3.8 mm
V-belt 3V425
V-belt 3V425 (9182020)
Dimensions: 9.8 x 1080 x 8.4 mm
Shaft for transmission wheel Concorde
Shaft for transmission wheel Concorde (6085471)
Dimensions: 15 x 92 mm
Cam for limit switch
Cam for limit switch (603510380)
Dimensions: 24.8 x 31.3 x 12 mm
PRIMA, lever for door
PRIMA, lever for door (6020119)
Dimensions: 202 x 97 x 2.5 mm
Zone locking Cam Left Hand
Zone locking Cam Left Hand (6089446)
Dimensions:No dimensions available.
Zone locking Cam
Zone locking Cam (6089447)
Dimensions:No dimensions available.
Motor toothed belt RPP675 - 5M/9 only for Encoder System
Motor toothed belt RPP675 - 5M/9 only for Encoder System (9190104)
Dimensions: 9 x 804 x 4.1 mm
Belt for transmission wheel
Belt for transmission wheel (9185005)
Dimensions: 10.5 x 1320 x 8.6 mm
Linear door operator, spring for retr.cam
Linear door operator, spring for retr.cam (9585100)
Dimensions: 42 x 10.8 x 1.2 mm
V-belt Z1105
V-belt Z1105 (918441105)
Dimensions: 9.8 x 1105 x 8.4 mm
Drice lever L=175
Drice lever L=175 (6085016)
Dimensions: 46 x 175 x 11 mm
Drive belt
Drive belt (6089450)
Dimensions: 12 x 450 x 8 mm
Drive belt
Drive belt (6089440)
Dimensions: 12 x 440 x 8 mm
Cam for door operator 9550CC
Cam for door operator 9550CC (6020451)
Dimensions: 111 x 84 x 18 mm
Safety block
Safety block (6025540)
Dimensions: 20 x 20 x 20 mm
Tacho ADX1/2 / ADF cabin door drive
Tacho ADX1/2 / ADF cabin door drive (6460200)
Dimensions: 32 x 12.8 x 20.3 mm
Bush for axle
Bush for axle (6085472)
Dimensions: 30 x 28 x 15.1 mm
Bush QKS8
Bush QKS8 (601011110)
Dimensions: 4.2 x 2.5 x 14 x 17.9 mm
Door ADC, fixing for safety edge drive
Door ADC, fixing for safety edge drive (6060600)
Dimensions: 78 x 206 x 40 mm
Bush with sholder for rubber stop
Bush with sholder for rubber stop (911010752)
Dimensions: 4.1 x 1.5 x 15.3 x 21.2 mm
Bush D23.8/6*7
Bush D23.8/6*7 (861010061)
Dimensions: 23.8 x 7 x 6 mm
Linear door operator, belt J6 1016
Linear door operator, belt J6 1016 (9185021)
Dimensions: 1016 x 14 x 3.5 mm
Belt 13*1120
Belt 13*1120 (913010100)
Dimensions: 12.5 x 1120 x 8 x 8 mm
Crank wheel arm buffer
Crank wheel arm buffer (601013764)
Dimensions: 24 x 7.2 x 6 mm
Linear door roller D67 8MM thread
Linear door roller D67 8MM thread (6185060)
Dimensions: 15 x 10 x 67.6 x 60 mm
QKS11TR, lever right to fix toothed belt
QKS11TR, lever right to fix toothed belt (601014016)
Dimensions: 163 x 50 x 18 mm
Toothed belt Sematic, L=660, typ PJ660J10
Toothed belt Sematic, L=660, typ PJ660J10 (9190102)
Dimensions: 12 x 660 x 3.5 mm
Bush D10/8.1*10
Bush D10/8.1*10 (601012905)
Dimensions: 10 x 9.8 x 8.1 mm
Cam for door operator 9550T
Cam for door operator 9550T (6020455)
Dimensions: 113 x 42 x 8 mm
Belt for AC motor
Belt for AC motor (9185010)
Dimensions: 14.4 x 914 x 4 mm
belt clamp Sematic car door
belt clamp Sematic car door (9190116)
Dimensions:No dimensions available.
Emergency door clutch
Emergency door clutch (6085130)
Dimensions: 48 x 60 x 30 mm
Drive arm cover
Drive arm cover (603510010)
Dimensions: 224 x 56 x 24.5 mm
Tension spring for AC motor
Tension spring for AC motor (9585090)
Dimensions: 41 x 26.5 x 4.5 mm
Belt pulley
Belt pulley (601012874)
Dimensions: 38 mm
Pinion (small)
Pinion (small) (6085230)
Dimensions: 76.1 x 5.1 x 35.8 mm
U-clamp for spring
U-clamp for spring (6010035)
Dimensions: 13 x 8.6 x 7.9 mm
Car door contact switch roller
Car door contact switch roller (6089115)
Dimensions: 10 x 5 x 30 mm
Toothed belt Hydra rcf1 price/cm
Toothed belt Hydra rcf1 price/cm (9182015)
Dimensions: 10.5 x 0 x 5.4 mm
BELT CLAMP FOR CABIN DOOR FOR CAM, WITH 2 PINS
BELT CLAMP FOR CABIN DOOR FOR CAM, WITH 2 PINS (9190129)
Dimensions:No dimensions available.
Pinion for DC motor
Pinion for DC motor (6085300)
Dimensions: 26 x 34 x 14 mm
Sematic III, connector between operator lever and rod
Sematic III, connector between operator lever and rod (6090341)
Dimensions: 19 x 42 x 19 mm
Belt Limit Clamp
Belt Limit Clamp (601012915)
Dimensions: 12.6 x 18.2 x 20 mm
Belt POLY-V L=1092 PJ6
Belt POLY-V L=1092 PJ6 (9182022)
Dimensions: 14 x 1092 x 3.9 mm
PAX car door belt clamp
PAX car door belt clamp (6020131)
Dimensions:No dimensions available.
Rubber buffer support
Rubber buffer support (6082027)
Dimensions: 80 x 285 x 25 mm
CLUTCH DISC
CLUTCH DISC (6444001)
Dimensions: L45 x OOR x EAR x LUTCH x 170x130x20x5) mm
Tension spring clockwise for motor 48V DC
Tension spring clockwise for motor 48V DC (9585070)
Dimensions: 41 x 26.5 x 4.5 mm
Tension spring counterclockwise for motor
Tension spring counterclockwise for motor (9585080)
Dimensions: 41 x 26.5 x 4.5 mm
door lever bearing QKS9
door lever bearing QKS9 (601010018)
Dimensions: 22 x 7 x 8 mm
PINION SPROCKET PM300
PINION SPROCKET PM300 (603510602)
Dimensions:No dimensions available.
9550T,TB=800-900,DIN RIGHT,LEVER
9550T,TB=800-900,DIN RIGHT,LEVER (6020428)
Dimensions: 20*30*650 mm
Roller lever
Roller lever (608210102)
Dimensions: 40 x 110 x 42 mm
Reversing lever for RH and central opening
Reversing lever for RH and central opening (6082017)
Dimensions: 74 x 94 x 35 mm
Stop for movf
Stop for movf (6089121)
Dimensions: 40 x 57 x 30 mm
Cycoidal operators drive belt 510l100
Cycoidal operators drive belt 510l100 (6487004)
Dimensions:No dimensions available.
Monitor VF92, Drive pinion for door engine
Monitor VF92, Drive pinion for door engine (609010173)
Dimensions: 27 x 40.6 mm
Stop roller
Stop roller (6089116)
Dimensions: 20 x 60 x 35 mm
Driving chain
Driving chain (608211630)
Dimensions: 11.6 x 900 x 13.2 mm
Emergency opening device
Emergency opening device (608210460)
Dimensions: 125 x 80 x 30 mm
Door operator 9550T, lever arm/counterweight
Door operator 9550T, lever arm/counterweight (6020046)
Dimensions: 40 x =c/o x 14.5 mm
Bush QKS8
Bush QKS8 (601011940)
Dimensions: 8.2 x 4 x 5.3 mm
Bush for door QKS9
Bush for door QKS9 (601013664)
Dimensions: 11 x 11.9 x 8.5 mm
Belt 10*1120
Belt 10*1120 (913010095)
Dimensions: 11 x 1120 x 6.8 x 6 mm
Belt 13*850
Belt 13*850 (913010140)
Dimensions: 12.5 x 850 x 8 x 8 mm
QKS11TL, lever left to fix toothed belt
QKS11TL, lever left to fix toothed belt (601014014)
Dimensions: 163 x 50 x 18 mm
Lever for car door
Lever for car door (6082030)
Dimensions: 110 x 40 x 85 mm
Siemens AT25, cabel for impuls generator motor/controller
Siemens AT25, cabel for impuls generator motor/controller (9990035)
Dimensions: 1480 mm
Belt pulley 77*18*28
Belt pulley 77*18*28 (603010355)
Dimensions: 20 x 18 x 77 x 49 x 7.2 mm
Shaft for bracket MRL
Shaft for bracket MRL (801010026)
Dimensions: 14 x 94 mm
Bracket for pulley MRL
Bracket for pulley MRL (801010025)
Dimensions: 90 x 108 x 68 mm
Bush QKS8
Bush QKS8 (601011970)
Dimensions: 10 x 12 x 5.1 mm
Pieces for small door lever QKS9
Pieces for small door lever QKS9 (601010020)
Dimensions: 12 x 16.5 x 4 x 10 x 12 x 20 mm
Lever ADC
Lever ADC (8560104)
Dimensions: 74 x 75 x 29.7 mm
HA bumper
HA bumper (6089126)
Dimensions: 30 x 75 x 45 mm
Toothed operator for driving belt
Toothed operator for driving belt (6085370)
Dimensions: 118 x 160 x 48 mm
Stop for door operator 9950T
Stop for door operator 9950T (6020440)
Dimensions: 39 x 61 x 25 mm
Pulley for v-belt
Pulley for v-belt (6085110)
Dimensions: 40 x 34 mm
Cycoidal operator belt green.
Cycoidal operator belt green. (6487044)
Dimensions: 15 x 625 x 2 mm
Zone locking Guide
Zone locking Guide (6089444)
Dimensions:No dimensions available.
Belt 13*950
Belt 13*950 (913010110)
Dimensions: 12.5 x 950 x 8 x 8 mm
Leather lining 75*44*4
Leather lining 75*44*4 (913010055)
Dimensions: 74 x 4.1 x 44 mm
Linear door operator, belt
Linear door operator, belt (9185030)
Dimensions: 20.2 x x 000 x 5.4 mm
Sematic III, bolt for door pannel release
Sematic III, bolt for door pannel release (6090340)
Dimensions: 31.9 x 35 x 35 mm
Belt Poly V 660J5
Belt Poly V 660J5 (9190021)
Dimensions: 12 x 660 x 3.3 mm
Band brake QKS8
Band brake QKS8 (6010175)
Dimensions: 169 x 11 x 13 x 11 mm
Switching cam
Switching cam (601010032)
Dimensions: 66 x 20 x 0.5 mm
Belt 8PJ1092
Belt 8PJ1092 (913010150)
Dimensions: 19 x 1092 x 4 mm
Stop left QKS9
Stop left QKS9 (601011430)
Dimensions: 85 x 40 x 25 mm
QKS11, bolt
QKS11, bolt (911010748)
Dimensions: 12 x 55 mm
Pinion for belt for ac motor
Pinion for belt for ac motor (6085290)
Dimensions: 26 x 34 x 14 mm
9550T, TB=800-900, DIN left, lever
9550T, TB=800-900, DIN left, lever (6020427)
Dimensions: 220 x 650 x 30 mm
Pinion for door operator
Pinion for door operator (6020185)
Dimensions: 160 x 108 x 65 mm
Kiekert, Door closing damper
Kiekert, Door closing damper (1590750)
Dimensions: 50 x 155 x 40 mm
Pinion (used for synchronisation)
Pinion (used for synchronisation) (6085490)
Dimensions: 30 x 23 x 101.8 x 19.8 mm
Bush QKS8
Bush QKS8 (601012005)
Dimensions: 26 x 18 x 9.7 mm
Wiper for door suspension
Wiper for door suspension (603010500)
Dimensions: 30 x 42 x 16.3 mm
Zone locking Guide Left Hand
Zone locking Guide Left Hand (6089445)
Dimensions:No dimensions available.
Transmission wheel 1 3201.15.1014
Transmission wheel 1 3201.15.1014 (608210790)
Dimensions: 19 x 23.9 x 252 x 32.2 x 49.2 mm
Mounting for drive lever
Mounting for drive lever (6085006)
Dimensions: 40 x 136.6 x 29.8 mm
Sematic III, fixing for operator lever
Sematic III, fixing for operator lever (6090293)
Dimensions: 70 x 55 x 64 mm
Toothed roller for toothed belt
Toothed roller for toothed belt (608210280)
Dimensions: 20.2 x 24 x 70.7 x 64.5 x 12.15 x 4 mm
Micro-switch for door operator 9550CC, 1NC
Micro-switch for door operator 9550CC, 1NC (3020408)
Dimensions: 16 x 71 x 48 mm
Bush QKS8
Bush QKS8 (601011935)
Dimensions: 12.1 x 3.2 x 10 mm
Complete drive arm assembly C/O=700
Complete drive arm assembly C/O=700 (603510054)
Dimensions: 375 x 56 x 24 mm
T82, rope fixing
T82, rope fixing (6010032)
Dimensions: 40 x 78 x 14 mm
Pinion gear
Pinion gear (6082020)
Dimensions: 210 x 4.6 x 60 mm
Complete drive arm assembly C/O=800
Complete drive arm assembly C/O=800 (603510050)
Dimensions: 56 x 410 x 24 mm
Linear door operator, pinion
Linear door operator, pinion (6085240)
Dimensions: 67.2 x 27 x 20 mm
Driving lever 3201.05.1013
Driving lever 3201.05.1013 (608210730)
Dimensions: 152 x 130 x 56.4 mm
Brake shoe lining
Brake shoe lining (601013662)
Dimensions: 68 x 1.8 x 44 mm
Door lever left
Door lever left (6010225)
Dimensions: 205 x 51 x 31 mm
Lever with roller QKS11
Lever with roller QKS11 (601012904)
Dimensions: 134 x 60 x 52 mm
Pulley wheel
Pulley wheel (608244701)
Dimensions:No dimensions available.
Transmission wheel 2
Transmission wheel 2 (608210760)
Dimensions: 19 x 15 x 252 x 27.4 x 51.7 mm
Door lever right
Door lever right (6010230)
Dimensions: 205 x 51 x 31 mm
Micro-switch for door operator 9550CC, 1NO
Micro-switch for door operator 9550CC, 1NO (3020407)
Dimensions: 16 x 71 x 48 mm
connecting lever for landing door QKS6,
connecting lever for landing door QKS6, (601010049)
Dimensions: 23.5 x 60 x 19.8 mm
QKS11TL, bearing left
QKS11TL, bearing left (601014018)
Dimensions: 103 x 54 x 52 mm
Toothed belt 5MR25, Door typ
Toothed belt 5MR25, Door typ (9130010)
Dimensions: 24.6 x 0 x 3.6 mm
QKS11TR, bearing right
QKS11TR, bearing right (601014020)
Dimensions: 103 x 54 x 52 mm
Door operator 9550CC, switch for cam
Door operator 9550CC, switch for cam (6020165)
Dimensions: 50 x 50 x 17 mm
Drive lever for door operator
Drive lever for door operator (6020080)
Dimensions: 155 x 665 x 75 mm
First transmission wheel
First transmission wheel (6082300)
Dimensions: 19 x 15 x 255 x 19 x 51 mm
Switch assembly KSB left
Switch assembly KSB left (601012896)
Dimensions: 45 x 60 x 39 mm
Complete drive arn assembly C/O=900
Complete drive arn assembly C/O=900 (603510051)
Dimensions: 56 x 460 x 24 mm
QKS6, buffer
QKS6, buffer (9110007)
Dimensions: 27.3 x 23.4 x 13.8 mm
T82, door suspension
T82, door suspension (6010027)
Dimensions: 432 x 105 x 19 mm
Zone locking arm
Zone locking arm (6089133)
Dimensions: 100 x 12 x 18 mm
KL45 door gear clutch
KL45 door gear clutch (6487002)
Dimensions: 117 x 5 x 75 mm
Transmission wheel with belt QKS11
Transmission wheel with belt QKS11 (601012910)
Dimensions: 220 x 47 x 14.2 mm
Axe for transmission wheel QKS11
Axe for transmission wheel QKS11 (601012876)
Dimensions: 14 x 102 x 8 mm
Pinion (big)
Pinion (big) (6085590)
Dimensions: 203 x 5.2 x 60 mm
Pinion for chain
Pinion for chain (6090957)
Dimensions: 75 x 17 x 17 mm
Dopler Thoothed belt
Dopler Thoothed belt (9190600)
Dimensions: 6 x 840 mm
Pulley for QKS11
Pulley for QKS11 (601012880)
Dimensions: 106 x 34 x 20 mm
End stopper for car door
End stopper for car door (6090358)
Dimensions: 30.5 x 54 x 10.5 mm
Door Operator guide shoe 8.20.83111
Door Operator guide shoe 8.20.83111 (6044853)
Dimensions: 50 x 35 x 10 mm
Sematic, Motor driving pulley
Sematic, Motor driving pulley (6090325)
Dimensions: 162 x 55 x 12 mm
Door operator 9550T, counterweight for door lever
Door operator 9550T, counterweight for door lever (6020044)
Dimensions: 105 x 115 x 36 mm
Lever with roller QK11/QK11TL
Lever with roller QK11/QK11TL (601010027)
Dimensions: 130 x 60 x 55 mm
Complete drive arn assembly CO=600
Complete drive arn assembly CO=600 (603510052)
Dimensions: 57 x 310 x 24.4 mm
High and low speed limit arm
High and low speed limit arm (6089005)
Dimensions: 90 x 75 x 16 mm
Stopping limit arm
Stopping limit arm (6089006)
Dimensions: 140 x 90 x 16 mm
Prisma door operator, belt 1600 MM long
Prisma door operator, belt 1600 MM long (9144040)
Dimensions: 20.2 x 0 x 5.4 mm
Sliding curve
Sliding curve (601013935)
Dimensions: 78 x 35 x 40 mm
AT20, Toothed belt, L=4000mm
AT20, Toothed belt, L=4000mm (9990201)
Dimensions: 12 x 4000 x 5.3 mm
Landing door Pira, accessory hin
Landing door Pira, accessory hin (6020008)
Dimensions: 40 x 78 x 58 mm
Transmission wheel 2
Transmission wheel 2 (608210820)
Dimensions: 19 x 15 x 252 x 31 x 50 mm
Switching cone
Switching cone (603010476)
Dimensions: 40 x 40 x 16.2 mm
Pinion for door operator 9550CC
Pinion for door operator 9550CC (6020450)
Dimensions: 165 x 123 x 104 mm
Toothed belt 450LO75
Toothed belt 450LO75 (913010155)
Dimensions: 19.4 x 1140 x 3.5 mm
Belt pulley ex 102, 5*25*20
Belt pulley ex 102, 5*25*20 (603010380)
Dimensions: 102.5 x 20.2 x 16.5 mm
Prisma door operator, belt 3400 MM long
Prisma door operator, belt 3400 MM long (9144030)
Dimensions: 16 x 0 x 5.4 mm
Cam for crank wheel
Cam for crank wheel (601013762)
Dimensions: 172 x 77 x 24 mm
Belt clamp Hydraplus Midi
Belt clamp Hydraplus Midi (91445034)
Dimensions: 94 x 94 x 20 mm
Transmission wheel QKS11
Transmission wheel QKS11 (601012875)
Dimensions: 220 x 47 x 14.2 mm
Lever with roller TR/C QKS11
Lever with roller TR/C QKS11 (601010045)
Dimensions: 130 x 60 x 52 mm
Pulley for toothed belt
Pulley for toothed belt (6030071)
Dimensions: 42 x 20 x 10 mm
VVF IN PUT CARD
VVF IN PUT CARD (6089021)
Dimensions: 30 x 30 x 6 mm
Belt pulley 137, 5*42*36 for interm. transmission
Belt pulley 137, 5*42*36 for interm. transmission (603010360)
Dimensions: 137.50 x 36.6 x 41.6 mm
Door Weight L=715 QKS9/Z
Door Weight L=715 QKS9/Z (601010029)
Dimensions: 24 x 715 x 24 mm
Linear door operator, belt length: 4000 mm
Linear door operator, belt length: 4000 mm (9185034)
Dimensions: 4000 x 20 x 5.4 mm
Linear door operator, belt
Linear door operator, belt (9185032)
Dimensions: 20 x 5000 x 5.4 mm
Belt pulley 32, 5*14*28
Belt pulley 32, 5*14*28 (603010370)
Dimensions: 32.5 x 28.1 x 14 mm
Set kinetic safety switch for car door
Set kinetic safety switch for car door (6025006)
Dimensions: 110 x 77 x 20 mm
Plastic support Smart Variodor 10
Plastic support Smart Variodor 10 (6010033)
Dimensions: 75 x 41 x 32 mm
Lever for QKS11 TR/C
Lever for QKS11 TR/C (601010047)
Dimensions: 200 x 96 x 23 mm
car door open end switch 1N/O 1N/C
car door open end switch 1N/O 1N/C (60440410)
Dimensions:No dimensions available.
Limit switch left
Limit switch left (3082010)
Dimensions: 62 x 44 x 18 mm
Limit switch right
Limit switch right (3082020)
Dimensions: 62 x 44 x 18 mm
Parts for small door lever
Parts for small door lever (6010045)
Dimensions: 16.2 x 6 x 20 x 12 mm
Chaine tension device
Chaine tension device (6085500)
Dimensions: 69.2 x 137.3 x 22.8 mm
Switch 1NC for door machine 9550T
Switch 1NC for door machine 9550T (3020412)
Dimensions: 51 x 46.9 x 16 mm
Wiring kit, VF circuit adapter, from VF4+ Compact to VF5+
Wiring kit, VF circuit adapter, from VF4+ Compact to VF5+ (571039217)
Dimensions: 7 x 610 mm
AT120 Transformer trafo 400v
AT120 Transformer trafo 400v (5744645)
Dimensions: 51 x 266 x 105 mm
9550CC, end shield with bearing
9550CC, end shield with bearing (6020449)
Dimensions: 140 x 140 x 18 x 20 mm
TOOTHED GEAR FOR DOOR OPERATOR 9950T (SET)
TOOTHED GEAR FOR DOOR OPERATOR 9950T (SET) (6044001)
Dimensions: 60*105*65 x x 105/90*71 mm
Micro-switch for door operator 955OT
Micro-switch for door operator 955OT (3020406)
Dimensions: 64 x 60 x 47 mm
Drive chain 15 teeth
Drive chain 15 teeth (6089125)
Dimensions: 730 x 10 mm
ADC2L/ADC3, door closed keeper
ADC2L/ADC3, door closed keeper (6060076)
Dimensions: 25 x 145 x 65 mm
Belt 13*1250
Belt 13*1250 (913010105)
Dimensions: 12.5 x 1250 x 8 x 8 mm
Gearing pulley assembly
Gearing pulley assembly (6089128)
Dimensions: 75 x 670 x 30 mm
Stop device
Stop device (601016016)
Dimensions: 85 x 45 x 30 mm
Tootehd belt pulley
Tootehd belt pulley (603010390)
Dimensions: 77.8 x 71.2) x 26.4 x 17 mm
Belt Pulley
Belt Pulley (9144780)
Dimensions:No dimensions available.
Door operator 9550, Printed circuit board for brake control 380V
Door operator 9550, Printed circuit board for brake control 380V (5720075)
Dimensions: 94 x 103 x 30 mm
Rubber bonded metal fastening for motor AT25 / AT40
Rubber bonded metal fastening for motor AT25 / AT40 (6090649)
Dimensions: 230 x 80 x 77 mm
Pinion big (used for synchronisation)
Pinion big (used for synchronisation) (6085600)
Dimensions: 203 x 5.2 x 80 mm
Stop right QKS9
Stop right QKS9 (601011435)
Dimensions: 85 x 40 x 25 mm
Drive chain 12 teeth mom,movf
Drive chain 12 teeth mom,movf (6089906)
Dimensions: 730 x 15 mm
Set of right hand activating cams
Set of right hand activating cams (6089112)
Dimensions:No dimensions available.
Toothed gear for door operator 9550T (set)
Toothed gear for door operator 9550T (set) (6020425)
Dimensions: 164 x 105 x 66 mm
Toothed belt Sematic type RPP8M/15 with parabolic profile LL=4000mm
Toothed belt Sematic type RPP8M/15 with parabolic profile LL=4000mm (9190106)
Dimensions: 12.4 x 4000 x 5.7 mm
AT25, toothed belt length 4m
AT25, toothed belt length 4m (9190605)
Dimensions: 12.2 x 4000 x 5.2 mm
Door Weight QKS8/T
Door Weight QKS8/T (601010028)
Dimensions: 24 x 465 x 24 mm
Belt pulley IP54 177, 5*25*20
Belt pulley IP54 177, 5*25*20 (603010415)
Dimensions: 178 x 20 x 16.5 mm
Machine 27BT, Packing
Machine 27BT, Packing (6020902)
Dimensions: 81 x 51 x 48 mm
Lever for QKS11TL (left closing, outside view)
Lever for QKS11TL (left closing, outside view) (601010046)
Dimensions: 195 x 89.5 x 24.5 mm
Linear door operator, rectractable cam left
Linear door operator, rectractable cam left (6085380)
Dimensions: 125 x 690 x 105 mm
Closing force limiter, right
Closing force limiter, right (601012900)
Dimensions: 120 x 110 x 40 mm
Coupler actuator for QKS9
Coupler actuator for QKS9 (601013922)
Dimensions: 425 x 190 x 75 mm
Set of MOVF activating cams
Set of MOVF activating cams (6089114)
Dimensions:No dimensions available.
Belt pulley
Belt pulley (603010416)
Dimensions: 153.5 x 20.3 x 16.5 mm
Set of left hand and centre opening activating cams
Set of left hand and centre opening activating cams (6089113)
Dimensions:No dimensions available.
Contact support QKS8
Contact support QKS8 (601013001)
Dimensions: 24 x 44.6 x 19.8 mm
Door drive bearing bracket
Door drive bearing bracket (6089009)
Dimensions:No dimensions available.
Door control Victory 01, encoder
Door control Victory 01, encoder (5790095)
Dimensions: 52 x 104 x 43.5 mm
Sinus Motor 14kg 400 rpm 12Pole IP20 50HZ
Sinus Motor 14kg 400 rpm 12Pole IP20 50HZ (6085021)
Dimensions: 170 x 205 x 172 mm
Closing Belt force limiter
Closing Belt force limiter (6010034)
Dimensions: 110 x 110 x 40 mm
Unlocking Spring Left Hand
Unlocking Spring Left Hand (6089449)
Dimensions:No dimensions available.
Support for motor door QKS6-9
Support for motor door QKS6-9 (6010303)
Dimensions: 89 x 100 x 65 mm
Threaded rod cpl.with head for reset QKS9Z/ZT
Threaded rod cpl.with head for reset QKS9Z/ZT (601013926)
Dimensions: 20 x 185 x 20 mm
Connecting rod with spring
Connecting rod with spring (601012255)
Dimensions: 27.5 x 270 mm
Contact for safety edge, L=140
Contact for safety edge, L=140 (601011525)
Dimensions: 140 x 72 x 27 mm
Limit switch kit
Limit switch kit (601013674)
Dimensions: 49 x 46 x 17.3 mm
Motor monophase 230V, N=400, 25Kgcm
Motor monophase 230V, N=400, 25Kgcm (6085550)
Dimensions: 210 x 223 x 160 mm
Motor for cabin door operator, 50Hz, 230VAC
Motor for cabin door operator, 50Hz, 230VAC (603510401)
Dimensions: 135 x 135 x 123 mm
Intermediate pulley wheel
Intermediate pulley wheel (60891401)
Dimensions: 15 x 33 x 20 mm
Linear door operator, retractable cam right
Linear door operator, retractable cam right (6085390)
Dimensions: 125 x 690 x 105 mm
Lever arm QKS6
Lever arm QKS6 (601011157)
Dimensions: 236 x 85 x 29.5 mm
Siemens AT18, door operator 24V right
Siemens AT18, door operator 24V right (9990197)
Dimensions: 85 x 205 x 87 mm
Door operator LEDD, DO2000M
Door operator LEDD, DO2000M (602010005)
Dimensions: 138 x 92 x 45 mm
Siemens AT18, door operator 24V left
Siemens AT18, door operator 24V left (9990196)
Dimensions: 85 x 205 x 87 mm
Limit arm set
Limit arm set (6089120)
Dimensions: 75 x 140 x 100 mm
Door operator LH with phoenic connector
Door operator LH with phoenic connector (6020134)
Dimensions: 198 x 90 x 90 mm
Fox Drive 100 watt 8amp Controller
Fox Drive 100 watt 8amp Controller (6085177)
Dimensions:No dimensions available.
Siemens AT120, door operator left hand
Siemens AT120, door operator left hand (9944011)
Dimensions: 270 x 115 x 115 mm
Force limiter arm right hand
Force limiter arm right hand (601011431)
Dimensions: 200 x 90 x 14.5 mm
Intermediate pulley wheel 15 teeth
Intermediate pulley wheel 15 teeth (6089141)
Dimensions: 150 x 33 x 20 mm
Motor pulley QKS8
Motor pulley QKS8 (601012828)
Dimensions: 50 x 26 x 14 mm
ADC2R, plate for coupler
ADC2R, plate for coupler (6060048)
Dimensions: 120 x 98 x 52 mm
Cam for crank wheel
Cam for crank wheel (601013930)
Dimensions: 121 x 67 x 24 mm
Intermediate pulley wheel 12 teeth
Intermediate pulley wheel 12 teeth (6089140)
Dimensions: 15 x 33 x 20 mm
Force limiter arm left hand
Force limiter arm left hand (601011432)
Dimensions: 175 x 90 x 14.5 mm
Krames, 3KTS, rope roller, axe 10, D140, B=37 for rope D3
Krames, 3KTS, rope roller, axe 10, D140, B=37 for rope D3 (6090551)
Dimensions: 140 mm
Motor AC, 230/400V, 50HZ, 30 KG/cm
Motor AC, 230/400V, 50HZ, 30 KG/cm (6085530)
Dimensions: 160 x 223 x 160 mm
Sematic DC motor 1 Amp 200V, 200W
Sematic DC motor 1 Amp 200V, 200W (6090209)
Dimensions: 150 x 207 x 100 mm
Door operator OAK45, SHaft with double pinion
Door operator OAK45, SHaft with double pinion (6060069)
Dimensions: 28.5 x 70.4 mm
Door gear F9, fixing bracket
Door gear F9, fixing bracket (6030034)
Dimensions: 140 x 160 x 130 mm
Varidor 10, Gear set
Varidor 10, Gear set (601010026)
Dimensions: 125 x 220 x 220 mm
Door arm (2 panel)
Door arm (2 panel) (6010036)
Dimensions: 40 x 330 x 18 mm
Tootehd belt pulley D120
Tootehd belt pulley D120 (603010395)
Dimensions: 25.2 x 16.5 x 120 mm
Support for motor door QKS8
Support for motor door QKS8 (6010295)
Dimensions: 90 x 60 x 40 mm
Prisma motor for jaguer Drive B
Prisma motor for jaguer Drive B (6044580)
Dimensions: 150 x 280 x 160 mm
Door motor2002/CsP 24Kg.cm,V127/230,A0.9/0.52,n900,50HZ
Door motor2002/CsP 24Kg.cm,V127/230,A0.9/0.52,n900,50HZ (6082085)
Dimensions: 210 x 255 x 150 mm
QKS9, lever rts
QKS9, lever rts (601013920)
Dimensions: 257 x 90 x 70 mm
Motor DC, 48V 1.8A, 55W
Motor DC, 48V 1.8A, 55W (6085570)
Dimensions: 145 x 207 x 155 mm
Drive pulley for QKS9/10
Drive pulley for QKS9/10 (601012134)
Dimensions: 320 x 69 x 48 mm
Motor 12 pol 24KG/cm, 400 RPM, 50HZ, 220/380
Motor 12 pol 24KG/cm, 400 RPM, 50HZ, 220/380 (608212321)
Dimensions: 160 x 230 x 210 mm
Sematic, door motor B105AANX02
Sematic, door motor B105AANX02 (6082176)
Dimensions:No dimensions available.
ADC, open keeper
ADC, open keeper (6060047)
Dimensions: 35 x 95 x 28 mm
ADC, open keeper
ADC, open keeper (6060092)
Dimensions: 35 x 95 x 28 mm
Siemens door motor AT18/AT40
Siemens door motor AT18/AT40 (6090638)
Dimensions: 85 x 243 x 100 mm
Base assembly for contact
Base assembly for contact (6060008)
Dimensions: 90 x 55 x 45 mm
QKS9, lever left
QKS9, lever left (601013919)
Dimensions: 278 x 89 x 72 mm
MOD drive pulley w/chain
MOD drive pulley w/chain (6089030)
Dimensions: 330 x 22 x 15 mm
DC MOTOR 1NM, UNTIL 1986
DC MOTOR 1NM, UNTIL 1986 (60440152)
Dimensions: 150 x 205 x 105 mm
Monitor VF92, door drive pulley with shaft
Monitor VF92, door drive pulley with shaft (609010170)
Dimensions: 21 x 17 x 250 x mm
Connecting rode QKS6Z TB=1100 and QKS9Z TB=800-1100
Connecting rode QKS6Z TB=1100 and QKS9Z TB=800-1100 (601014085)
Dimensions: 624 x 95 x 37 mm
Motor DC, 48V 1.3A, 30W
Motor DC, 48V 1.3A, 30W (6085560)
Dimensions: 145 x 207 x 155 mm
RCRE24 for DC-door operator
RCRE24 for DC-door operator (5790005)
Dimensions: 137 x 208 x 40 mm
Motor 12 pol 400 RPM, 50HZ, 240/415
Motor 12 pol 400 RPM, 50HZ, 240/415 (608244321)
Dimensions: 160 x 230 x 210 mm
AT120 Lift door Controller
AT120 Lift door Controller (5720645)
Dimensions: 51 x 266 x 105 mm
Motor 12 pol 400 RPM, 50HZ, 240/415
Motor 12 pol 400 RPM, 50HZ, 240/415 (60824432)
Dimensions: 160 x 230 x 210 mm
Controller of LVH24SD
Controller of LVH24SD (601014404)
Dimensions: 175 x 120 x 50 mm
Band brake for magnet brake 601013765
Band brake for magnet brake 601013765 (601013775)
Dimensions: 90 x 180 x 21 mm
Linear Type B -7 amp door operator,
Linear Type B -7 amp door operator, (6085621)
Dimensions: 180 x 296 x 185 mm
Sematic, DC-motor 200V DC, 1A, 200W with optical encoder
Sematic, DC-motor 200V DC, 1A, 200W with optical encoder (6082153)
Dimensions: 145 x 245 x 103 mm
Linear door operator, motor 14A
Linear door operator, motor 14A (6085520)
Dimensions: 134 x 165 x 250 mm
Coupling stick with spring
Coupling stick with spring (601012275)
Dimensions: 26 x 268 mm
Varidor 30 Pulley
Varidor 30 Pulley (601012950)
Dimensions: 170 x 68 x 12 mm
Varidor 10, lever Right Hand
Varidor 10, lever Right Hand (601020020)
Dimensions: 310 x 68 x 78 mm
QKS8, limit cam
QKS8, limit cam (601014075)
Dimensions: 134 x 60 x 39.5 mm
Motor DO220
Motor DO220 (6020037)
Dimensions: 150 x 215 mm
Contact bas left including switch
Contact bas left including switch (601012890)
Dimensions:No dimensions available.
Monitor VF92, motor 20Kg
Monitor VF92, motor 20Kg (609010175)
Dimensions: 160 x 254 x 175 mm
Cluch hub with tool for TB >=1000
Cluch hub with tool for TB >=1000 (913010080)
Dimensions: 68.2 x 52 x 20 mm
Linear door operator, motor 7A
Linear door operator, motor 7A (6085510)
Dimensions: 134 x 165 x 250 mm
Fox Drive 100 watt 8amp Controller
Fox Drive 100 watt 8amp Controller (6085171)
Dimensions:No dimensions available.
ADC1/ADC0L, door closed keeper
ADC1/ADC0L, door closed keeper (6060075)
Dimensions: 25 x 145 x 48 mm
Door Lever for QKS6
Door Lever for QKS6 (601014121)
Dimensions: 296 x 100 x 30 mm
Car door ADC2+ADC3, ramp right
Car door ADC2+ADC3, ramp right (6060620)
Dimensions: 175 x 175 x 38 mm
Meiller, motor ABM 0.09KW, 220/380V (car door) U = 750
Meiller, motor ABM 0.09KW, 220/380V (car door) U = 750 (6090530)
Dimensions: 262 x 179 x 135 mm
Clamping device for ADC1+ADC2L
Clamping device for ADC1+ADC2L (6060054)
Dimensions: 20 x 80 x 22 mm
Sematic, DC-motor 30V - 200V DC
Sematic, DC-motor 30V - 200V DC (6090189)
Dimensions: 150 x 210 x 120 mm
Force limilter QKS8 TL
Force limilter QKS8 TL (601010080)
Dimensions: 200 x 30 x 38 mm
Door motor 2 AMP
Door motor 2 AMP (6044561)
Dimensions:No dimensions available.
Crank wheel QKS9
Crank wheel QKS9 (6010245)
Dimensions: 320 x 69 x 42 mm
interface board AT120 for door operator
interface board AT120 for door operator (5744350)
Dimensions:No dimensions available.
Monitor VF92, door drive pulley
Monitor VF92, door drive pulley (609010171)
Dimensions: 21 x 29.8 x 250 x 95 x 15 x 52 mm
SPRING FOR EMERGENCY UNLOCK DEVICE FOR LANDING DOOR
SPRING FOR EMERGENCY UNLOCK DEVICE FOR LANDING DOOR (9560021)
Dimensions:No dimensions available.
Siemens AT40 control unit relay
Siemens AT40 control unit relay (6090610)
Dimensions: 1] mm
Stator 3*380V, 1000 1/min for door operator 9550T
Stator 3*380V, 1000 1/min for door operator 9550T (6020405)
Dimensions: 152 x 132 mm
Car door ADC2+ADC3,ramp left
Car door ADC2+ADC3,ramp left (6060610)
Dimensions: 75 x 175 x 38 mm
9550T, door lever complette for co=700-1300 right
9550T, door lever complette for co=700-1300 right (6020014)
Dimensions: 955 mm
Belt 8PJ1054
Belt 8PJ1054 (913010145)
Dimensions: 19 x 1054 x 3.8 mm
Cabin door drive, motor 380/415 1000rpm
Cabin door drive, motor 380/415 1000rpm (6020045)
Dimensions: 150 x 210 x 150 mm
Osma, motor door operator 40V =
Osma, motor door operator 40V = (6090048)
Dimensions: 80 x 180 mm
Motor DC, 48V 3,5A, 120W
Motor DC, 48V 3,5A, 120W (6085580)
Dimensions: 150 x 280 x 160 mm
Crank wheel,QKS6
Crank wheel,QKS6 (601011325)
Dimensions: 320 x 65 x 42 mm
ADC2L, plate for coupler
ADC2L, plate for coupler (6060049)
Dimensions: 120 x 98 x 52 mm
9550T, door lever complete for co=700-1300 left
9550T, door lever complete for co=700-1300 left (6020039)
Dimensions: 220 x 955 x 50 mm
Switch mounting plate left hand QKS10
Switch mounting plate left hand QKS10 (601014784)
Dimensions: 210 x 70 x 25 mm
Stator 3*105V, 750 1/min for door operator 9550T
Stator 3*105V, 750 1/min for door operator 9550T (6020410)
Dimensions: 152 x 132 mm
QKS8, lever ZH
QKS8, lever ZH (601010023)
Dimensions: 125 x 425 x 25.6 mm
Door drive shaft left with coupler and end bearing, TB=900
Door drive shaft left with coupler and end bearing, TB=900 (6090217)
Dimensions: 1120 mm
Monitor VF92, motor type 2083 20KG/cm with brake 48V DC
Monitor VF92, motor type 2083 20KG/cm with brake 48V DC (609010174)
Dimensions: 255 x 180 x 180 mm
AT120 up grade 230v 2.5m r/h kit complete
AT120 up grade 230v 2.5m r/h kit complete (57244008)
Dimensions:No dimensions available.
Monitor VF92, motor 14Kg
Monitor VF92, motor 14Kg (609010172)
Dimensions: 140 x 245 x 160 mm
Lust, Replacement for FU202S, 220V 50/60Hz 700Va, In 3.4A
Lust, Replacement for FU202S, 220V 50/60Hz 700Va, In 3.4A (5790125)
Dimensions: 180 x 130 x 66 mm
Switch mounting plate right hand QKS10
Switch mounting plate right hand QKS10 (601014786)
Dimensions: 210 x 70 x 25 mm
door motor ( HSDS D2200 OPEN 2002 ( HSDS ) 2PSO & 2POO ( 220V 200W 1000RPM ) (with flat plastic plug )
door motor ( HSDS D2200 OPEN 2002 ( HSDS ) 2PSO & 2POO ( 220V 200W 1000RPM ) (with flat plastic plug ) (6044350)
Dimensions: 130 x 160 mm
Clutch
Clutch (913010065)
Dimensions: 20 x 39 x 109 x 84 x 5.8 mm
Limit switch and plate right hand
Limit switch and plate right hand (601012390)
Dimensions: 150 x 52 x 20 mm
Toothed pulley Z=18 bore 17
Toothed pulley Z=18 bore 17 (603010480)
Dimensions: 78.7 x 17.2 x 16.9 mm
Door operator AT12 comp.with power supply 24V for door weight 120kg pinion left
Door operator AT12 comp.with power supply 24V for door weight 120kg pinion left (6090641)
Dimensions:No dimensions available.
Motor AC, 230/400V, 50HZ, 24 KG/cm
Motor AC, 230/400V, 50HZ, 24 KG/cm (6085540)
Dimensions: 210 x 223 x 160 mm
Sematic DC motor 2Nm
Sematic DC motor 2Nm (6090357)
Dimensions: 150 x 315 x 102 mm
Switch assembly KET-0 left
Switch assembly KET-0 left (601012886)
Dimensions: 114 x 84 x 22 mm
Stator 3*105V, 1000 1/min for door operator 9550T
Stator 3*105V, 1000 1/min for door operator 9550T (6020415)
Dimensions: 152 x 132 mm
Frictional locking TR/C
Frictional locking TR/C (601012882)
Dimensions: 134 x 70 x 25 mm
Limit switch and plate left hand
Limit switch and plate left hand (601012385)
Dimensions: 150 x 52 x 20 mm
Switch device with 3 contacts
Switch device with 3 contacts (6020858)
Dimensions: 94 x 70 x 45 mm
Varidor 30, encoder kit
Varidor 30, encoder kit (571010115)
Dimensions:No dimensions available.
Flender/Himmel wormgear S05-M1B8, left
Flender/Himmel wormgear S05-M1B8, left (641010038)
Dimensions: 355 x 190 x 165 mm
Frictional locking TL
Frictional locking TL (601012881)
Dimensions: 134 x 70 x 25 mm
Krames, door drive 62.0*80-2
Krames, door drive 62.0*80-2 (6090889)
Dimensions:No dimensions available.
Key pad KP300 for door drive
Key pad KP300 for door drive (571010158)
Dimensions: 85 x 70 x 35 mm
GAL Door Motor 1\2 hp 2 Wire
GAL Door Motor 1\2 hp 2 Wire (6089018)
Dimensions:No dimensions available.
PCB MAIN CONTROL BOARD FOR E OPERATOR
PCB MAIN CONTROL BOARD FOR E OPERATOR (5724491)
Dimensions:No dimensions available.
DO2000 BOARD
DO2000 BOARD (6020098)
Dimensions: DA24350AW14 mm
Magnet brake 24V, 5W QKS11
Magnet brake 24V, 5W QKS11 (6010298)
Dimensions: 54 x 22 x 19 mm
Belt pulley
Belt pulley (603010490)
Dimensions: 79.3 x 31 x 16.9 mm
QKS11/TR/C axle modification kit
QKS11/TR/C axle modification kit (911010753)
Dimensions:No dimensions available.
Krames, door operator drive KD620*80-2, P=25W, 220/380V, I=0.17A
Krames, door operator drive KD620*80-2, P=25W, 220/380V, I=0.17A (6090550)
Dimensions: 73 x 260 x 100 mm
Door controller RC24
Door controller RC24 (608213401)
Dimensions: 212 x 295 x 145 mm
Door controller Port 400
Door controller Port 400 (5790830)
Dimensions: 200 x 300 x 170 mm
Sematic 2000B/C/BG/MF Evolution
Sematic 2000B/C/BG/MF Evolution (6082097)
Dimensions:No dimensions available.
RCF1 door controller and motor for 6 and 12 Amp
RCF1 door controller and motor for 6 and 12 Amp (6082148)
Dimensions: 492 x 205 x 90 mm
Door controller RC48
Door controller RC48 (608213400)
Dimensions: 210 x 300 x 148 mm
Modification kit QKS11/TL
Modification kit QKS11/TL (911010751)
Dimensions:No dimensions available.
Door motor brake QKS8 80V DC
Door motor brake QKS8 80V DC (601012924)
Dimensions: 54 x 22.3 x 19 mm
2000B EVOLUTION KIT
2000B EVOLUTION KIT (6082087)
Dimensions:No dimensions available.
Drive board MOCT
Drive board MOCT (6089139)
Dimensions: 210 x 335 x 90 mm
Drive board
Drive board (6089101)
Dimensions: 140 x 180 x 105 mm
Langer & laumann Door Operator Complete
Langer & laumann Door Operator Complete (57444010)
Dimensions:No dimensions available.
Drive board sgmovfr oo7 mark1
Drive board sgmovfr oo7 mark1 (6089020)
Dimensions: 220 x 160 x 60 mm
Drive Board MOCT 0004r
Drive Board MOCT 0004r (6089229)
Dimensions:No dimensions available.
QKS11 TL, kit for door operator
QKS11 TL, kit for door operator (601011800)
Dimensions:No dimensions available.
Belt pulley 108*25*20
Belt pulley 108*25*20 (603010325)
Dimensions: 20.3 x 16.5 x 148.3 x 124.5 x 4.7 mm
Door operator 105V AC, 50HZ, 1000 RPM Typ 9550T
Door operator 105V AC, 50HZ, 1000 RPM Typ 9550T (6020861)
Dimensions: 340 x 280 x 140 mm
Door motor 24V 4.9a SG80K
Door motor 24V 4.9a SG80K (6030302)
Dimensions:No dimensions available.
Resetter QKS9 QKS9Z/ZT
Resetter QKS9 QKS9Z/ZT (601013918)
Dimensions: 425 x 190 x 75 mm
Stator 500U/min. 220/380 Volt for door operator 9550T
Stator 500U/min. 220/380 Volt for door operator 9550T (6020834)
Dimensions: 152 x 132 mm
9550T, Motor 105V 50Hz 750 U/min
9550T, Motor 105V 50Hz 750 U/min (6020168)
Dimensions:No dimensions available.
Drive motor .5 hp 230 ac MOVF
Drive motor .5 hp 230 ac MOVF (6089152)
Dimensions:No dimensions available.
Door Motor w/encoder
Door Motor w/encoder (6089573)
Dimensions:No dimensions available.
Door operator D6, motor MPT-M 24V/4Amp/700U/min/0.06KW
Door operator D6, motor MPT-M 24V/4Amp/700U/min/0.06KW (6030065)
Dimensions: 82 x 195 mm
Toothed pulley Z=18 for ball bearing
Toothed pulley Z=18 for ball bearing (603010485)
Dimensions: 79 x 20 x 42 mm
Elex Aurex M2 board
Elex Aurex M2 board (57440015)
Dimensions: 240 x 120 x 60 mm
PRINTED CIRCUIT BOARD SM01PA/J WITHOUT DISPLAY
PRINTED CIRCUIT BOARD SM01PA/J WITHOUT DISPLAY (5782037)
Dimensions:No dimensions available.
DOOR OPERATOR FOR TTK15, CO=1300, RIGHT
DOOR OPERATOR FOR TTK15, CO=1300, RIGHT (609010545)
Dimensions:No dimensions available.
QKS11 TR/C, kit for door operator
QKS11 TR/C, kit for door operator (601011801)
Dimensions:No dimensions available.
Door operator 220/380V, 50HZ, 750 RPM
Door operator 220/380V, 50HZ, 750 RPM (6020874)
Dimensions: 340 x 280 x 190 mm
MODIFICATION KIT DOOR DRIVE FOR OTIS 9940, LEFT OPENING
MODIFICATION KIT DOOR DRIVE FOR OTIS 9940, LEFT OPENING (609010538)
Dimensions:No dimensions available.
Door ADC, genarator RDC 10KE
Door ADC, genarator RDC 10KE (6060065)
Dimensions: 62 x 62.2 x 15.8 mm
QKS10 crank wheel CO=1200, 1300, 1400
QKS10 crank wheel CO=1200, 1300, 1400 (601014093)
Dimensions: 320 x 70 x 25 mm
MODIFICATION KIT DOOR DRIVE FOR SCHINDLER QKS11, RIGHT OPENING
MODIFICATION KIT DOOR DRIVE FOR SCHINDLER QKS11, RIGHT OPENING (609010533)
Dimensions:No dimensions available.
MODIFICATION KIT DOOR DRIVE FOR THYSSEN M2TS1/TS2/TS3, LEFT OPENING
MODIFICATION KIT DOOR DRIVE FOR THYSSEN M2TS1/TS2/TS3, LEFT OPENING (609010540)
Dimensions:No dimensions available.
Clutch
Clutch (913010060)
Dimensions: 23 x 12 x 79.8 x 56.3 x 18 mm
Door operator AT40 compl. 30V for door weight 180kg pinion right
Door operator AT40 compl. 30V for door weight 180kg pinion right (6090644)
Dimensions: dded x 8042016 mm
Door operator AT40 compl.30V for door weight 180kg pinion left
Door operator AT40 compl.30V for door weight 180kg pinion left (6090645)
Dimensions: dded x 8042016 mm
MODIFICATION KIT DOOR DRIVE FOR THYSSEN M2TS4, RIGHT OPENING
MODIFICATION KIT DOOR DRIVE FOR THYSSEN M2TS4, RIGHT OPENING (609010541)
Dimensions:No dimensions available.
Printed circuit board car door op. > 1000 MM, 220V
Printed circuit board car door op. > 1000 MM, 220V (5730213)
Dimensions: 185 x 177 x 35 mm
escalator motor MBS54-10 TO85 - 220/380 N 60hz
escalator motor MBS54-10 TO85 - 220/380 N 60hz (6010293)
Dimensions:No dimensions available.
MODIFICATION KIT DOOR DRIVE FOR SCHINDLER QKS8, LEFT OPENING
MODIFICATION KIT DOOR DRIVE FOR SCHINDLER QKS8, LEFT OPENING (609010531)
Dimensions:No dimensions available.
MODIFICATION KIT DOOR DRIVE FOR SCHINDLER QKS11, LEFT OPENING
MODIFICATION KIT DOOR DRIVE FOR SCHINDLER QKS11, LEFT OPENING (609010534)
Dimensions:No dimensions available.
MODIFICATION KIT DOOR DRIVE FOR THYSSEN M2TS1/TS2/TS3, RIGHT OPENING
MODIFICATION KIT DOOR DRIVE FOR THYSSEN M2TS1/TS2/TS3, RIGHT OPENING (609010539)
Dimensions:No dimensions available.
MODIFICATION KIT DOOR DRIVE FOR SCHINDLER QKS8, RIGHT OPENING
MODIFICATION KIT DOOR DRIVE FOR SCHINDLER QKS8, RIGHT OPENING (609010530)
Dimensions:No dimensions available.
MODIFICATION KIT DOOR DRIVE FOR THYSSEN M2TS4, LEFT OPENING
MODIFICATION KIT DOOR DRIVE FOR THYSSEN M2TS4, LEFT OPENING (609010542)
Dimensions:No dimensions available.
Door operator 220/380V, 50HZ, 1000 RPM
Door operator 220/380V, 50HZ, 1000 RPM (6020864)
Dimensions:No dimensions available.
Door operator 220/380V, 50HZ 750 RPM
Door operator 220/380V, 50HZ 750 RPM (6020849)
Dimensions: 340 x 280 x 140 mm
Door operator AT40 compl.30V for door weight 400kg pinion left
Door operator AT40 compl.30V for door weight 400kg pinion left (6090623)
Dimensions: dded x 8042016 mm
Door operator AT40 compl. 30V for door weight 400kg pinion right
Door operator AT40 compl. 30V for door weight 400kg pinion right (6090646)
Dimensions: dded x 8042016 mm
MODIFICATION KIT DOOR DRIVE FOR SCHINDLER QKS8, CENTRAL OPENING
MODIFICATION KIT DOOR DRIVE FOR SCHINDLER QKS8, CENTRAL OPENING (609010532)
Dimensions:No dimensions available.
Printed circuit board car door op. > 1000 MM, 40V
Printed circuit board car door op. > 1000 MM, 40V (5730212)
Dimensions: 185 x 177 x 35 mm
Door gear F9, motor with integrated Printed circuit board
Door gear F9, motor with integrated Printed circuit board (6030033)
Dimensions: 115 x 240 x 240 mm
W1 door controller P3-1211, 220V, I=25, TB=>1000 / Ersatz F9 Türantrieb
W1 door controller P3-1211, 220V, I=25, TB=>1000 / Ersatz F9 Türantrieb (573010865)
Dimensions: 185 x 177 x 35 mm
QKS9-10, crank wheel
QKS9-10, crank wheel (601014050)
Dimensions: 320 x 65 x 25 mm
W1 door controller P3-1111, 220V, I=12, 5, TB<=1000 / Ersatz F9 Türantrieb
W1 door controller P3-1111, 220V, I=12, 5, TB<=1000 / Ersatz F9 Türantrieb (573010860)
Dimensions: 185 x 177 x 35 mm
Drive board & Drive board sgmovfr oo7 mark1
Drive board & Drive board sgmovfr oo7 mark1 (6089442)
Dimensions:No dimensions available.
Band brake 80V for door QKS6
Band brake 80V for door QKS6 (601013765)
Dimensions: 115 x 87 x 76 mm
Printed circuit board for car door < 1000 mm, 220v
Printed circuit board for car door < 1000 mm, 220v (5730210)
Dimensions: 185 x 177 x 35 mm
F9 modification kit right
F9 modification kit right (6030031)
Dimensions: 480 x 245 x 280 mm
Door ADM, door control unit
Door ADM, door control unit (6060021)
Dimensions: 280 x 80 x 70 mm
DC-Motor without clutch
DC-Motor without clutch (603010230)
Dimensions: 200 x 280 x 150 mm
Rope pulley D84/16*24 for door operator motor
Rope pulley D84/16*24 for door operator motor (6130856)
Dimensions: 84 x 24 x 16 mm
Door motor 24V with tachodynamo
Door motor 24V with tachodynamo (6030070)
Dimensions: 108 x 197 x 100 mm
F9 modification kit left
F9 modification kit left (6030032)
Dimensions: 480 x 245 x 280 mm
AC-Motor KOD 444 PU 4541
AC-Motor KOD 444 PU 4541 (603010260)
Dimensions: 159 x 285 x 118 mm
VVF converter VARIODYN 20
VVF converter VARIODYN 20 (6010100)
Dimensions: 260 x 290 x 230 mm

We are here to help!
If you cannot find the lift components you need, please email sales@davenportliftcontrol.com or call us on 020 8504 8286
Contact Us
Davenport Lift Control
3 The Broadway Mews
The Broadway
Woodford Green
Essex, IG8 0HQ

Tel: 020 8504 8286
sales@davenportliftcontrol.com

About Us
Terms & Conditions
Privacy Policy
Cookies Policy
Sitemap
Davenport CatalogueCatalogueOur free catalogue is an ideal tool for your service team
Order a Copy


Disclaimer:

Davenport Lift Control is an independent supplier of lift components and is not affiliated with, authorised by, or an official distributor of the manufacturers referenced.

All trademarks and brand names are used for identification purposes only.

© Copyright 2026 Davenport Lift Control
Ecommerce Website Design by Designer Websites